DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
Configuring via Web-based Interface
Mesh Network Subordinate Device (Agent)
In order to configure DIR-822 as a subordinate device of your mesh network, from the
Connection method list, select the EasyMesh value. Then from the Device role list, select
the Agent value. From the Backhaul band list, select the band where your main device (in the
Controller role) operates.
Then a subordinate device is configured in the access point mode. In this mode you can change the
LAN IP address, set your own settings for the wireless network in the 2.4GHz and 5GHz bands, and
set your own password for access to the web-based interface of the device.
Figure 40. Configuring the EasyMesh function for a subordinate device.
Page 51 of 235
To Next Page
Loading...
