DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
Configuring via Web-based Interface
To set a schedule for a task which will be applied to a rule or setting of the firewall or will
enable/disable Wi-Fi connection or Wi-Fi filter, click the ADD button ( ) in the All Tasks
section.
Figure 151. The window for adding a schedule for a task.
In the opened window, in the System Time field, the system time of the device is displayed. You
can select the simplified mode of the schedule. To do this, select the Simplified mode value from
the Mode drop-down list and specify the following parameters:
Parameter Description
Perform task on
schedule
Move the switch to the right to enable the schedule.
Move the switch to the left to disable the schedule.
Simplified mode
Schedule name
Specify a schedule name for easier identification. You can specify
any name.
Page 206 of 235
To Next Page
Loading...
