DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
L2TP pass through Select the checkbox to enable the L2TP pass through function.
IPSec pass through
Select the checkbox to enable the IPSec pass through function.
Figure 147. The Advanced / Miscellaneous page. The XUPNPD section.
To use the XUPNPD plug-in, connect a USB storage to the router and select the Enable checkbox
in the XUPNPD section.
!
To let IPTV services operate using the XUPNPD plug-in, enable the UDPXY application.
Then click the Apply button.
In the Service field, the address of the web-based interface of the XUPNPD plug-in is displayed.
To access the page of the plug-in and configure all needed settings, click the link.
Figure 148. The XUPNPD plug-in page.
Page 193 of 257
To Next Page
Loading...
