DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
APN An access point name.
Without authorization
Move the switch to the right if your operator does not require
authorization.
Authentication
protocol
Select a required authentication method from the drop-down list.
Username
A username (login) to connect to the network of the operator.
Password
A password to connect to the network of the operator. Click the
Show icon ( ) to display the entered password.
Figure 87. The page for creating a new LTE connection. The IPv4 section.
Parameter Description
IPv4
Obtain DNS server
addresses
automatically
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Primary DNS /
Secondary DNS
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Vendor ID The identifier of your ISP. Optional.
Hostname
A name of the router specified by your ISP. Optional.
12 Some LTE USB modems do not support network type selection and work in the Auto mode regardless of the value
selected from the drop-down list.
Page 111 of 249
To Next Page
Loading...
