DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
To create
18
a new filtering rule for a device, click the ADD button ( ) in the Rules section, or
left-click the name of the filtering mode in the line of the device for which a rule should be created
in the Known Clients section.
Figure 180. Adding a new rule for the Yandex.DNS service.
In the opened window, you can specify the following parameters:
Parameter Description
MAC address
The MAC address of a device from the router's LAN. You can enter
the MAC address of a device connected to the router's LAN at the
moment. To do this, select the relevant device from the drop-down
list (the field will be filled in automatically).
IP address
The IP address of a device from the router's LAN.
To assign several fixed IP addresses to a device with a certain MAC
address, click the ADD button, and in the line displayed, enter an IP
address. A device of your LAN can have one IPv4 address and
several IPv6 addresses.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
Name
Enter a name for the rule for easier identification. Optional.
18 When a new rule for filtering is created, a MAC address and IP address pair is displayed on the Connections
Setup / LAN page. The created pair will be deleted with the relevant rule.
Page 241 of 249
To Next Page
Loading...
