28D-Link DIR-835 User Manual
Section 3 - Conguration
20MHz - Select if you are not using any 802.11n wireless clients.
40MHz - Select if you are using 802.11n wireless clients only.
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-835. If Invisible is selected, the
SSID of the DIR-835 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-835 in
order to connect to it.
Refer to page 93 for more information regarding wireless security.
Channel Width:
Visibility Status:
Wireless Security:
To Next Page
Loading...
