D-Link DIR-835 - System

78D-Link DIR-835 User Manual
Section 3 - Conguration
Use this option to save the current router
conguration settings to a le on the hard disk of
the computer you are using. First, click the Save
button. A le dialog will appear, allowing you to
select a location and le name for the settings.
Use this option to load previously saved
router configuration settings. First, use the
Browse option to nd a previously saved le
of conguration settings. Then, click the Load
button to transfer those settings to the router.
This option will restore all conguration settings
back to the settings that were in eect at the time
the router was shipped from the factory. Any
settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current router conguration
settings, use the Save button above.
Click to reboot the router.
Save Settings
to Local Hard
Drive:
Load Settings
from Local
Hard Drive:
Restore
to Factory
Default
Settings:
Reboot
Device:
System
This section allows you to manage the router’s conguration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve
created.