D-Link DIR-835 - Network Filters

57D-Link DIR-835 User Manual
Section 3 - Conguration
Network Filters
Select Turn MAC Filtering Off, Allow MAC
addresses listed below, or Deny MAC addresses
listed below from the drop-down menu.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.
Click to remove the MAC address.
Congure MAC
Filtering:
MAC Address:
DHCP Client:
Clear:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.