D-Link DPH-120SE - Page 28

this domain to the end of the domain which you input
before and parse it again.
Primary DNS Input your primary DNS server address.
Secondary DNS Input your standby DNS server address.
Display Name Set the display name.
Server Address Input your SIP server address.
Server Port Set your SIP server port.
Authentication User Input your SIP register account name.
Authentication
Password
Input your SIP register password.
SIP User Input the phone number assigned by your VOIP
service provider.
Enable Registration Start to register or not by selecting it or not.
Display detailedinformation that you manual config.
Choose DHCP MODE, click Nestcan config SIP (default SIP1) simply,also
can browse too. ClickBackcan return to the last page. Like Static IP MODE.
Choose PPPoE MODE, clickNestcan config the PPPoE account/password
and SIP (default SIP1) simply,also can browse too. Click Backcan return to
the last page. Like Static IP MODE.