SIP Config
Field name explanation
SIP Line
Choose line to set info about SIP,there are 4 lines to choose. You can switch
by【Load】button.
Basic Settings
Status Shows if the phone has been registered the SIP
server or not; or so, show Unapplied.
Server Address Input your SIP server address.
Server Port Set your SIP server port.
Authentication User Input your SIP register account name.
Authentication
Password
Input your SIP register password.
SIP User Input the phone number assigned by your VoIP
service provider. Phone will not register if there is
no phone number configured.
Display Name Set the display name.
Proxy Server Address
Set proxy server IP address (Usually, Register SIP
Server configuration is the same as Proxy SIP
Server. But if your VoIP service provider gives
different configurations between Register SIP Server
and Proxy SIP Server, you need make different
settings).
Proxy Server Port Set your Proxy SIP server port.
Proxy User Input your Proxy SIP server account.
Proxy Password Input your Proxy SIP server password.
Set the sip domain if needed, otherwise this VoIP
To Next Page
Loading...
