D-Link DPH-120SE - Page 53

AUDIO Configuration
Field name explanation
First Codec The firstpreferential DSP codec: G.711A/u, G.722,
G.723, G.729.
Second Codec The second preferential DSP codec: G.711A/u, G.722,
G.723, G.729.
Third Codec The third preferential DSP codec: G.711A/u, G.722,
G.723, G.729.
Fourth Codec The forth preferential DSP codec: G.711A/u, G.722,
G.723, G.729.
Fifth Codec The fifth preferential DSP codec: G.711A/u, G.722,
G.723, G.729.
Sixth codec The sixth preferential DSP codec: G.711A/u, G.722,
G.723, G.729.
Handset Input
Volume
Specify Input(MIC) Volume grade.
G729AB Payload
Length
Set G729 Payload Length.
Onhook Time Specify the least reflection time of Hand down, the
default is 200ms.
Default Ring Type Select Ring Type.
Handset Output
Volume
Specify Output(receiver) Volume grade.
Speakerphone
volume
Specify Speakerphone Volume grade.
Ring Volume Specify Ring Volume grade.
G722 Timestamps 160/20ms or 320/20ms is available.
G723.1 Bit Rate 5.3 kb/s or 6.3 kb/s is available.
Default Ring Type Set up the ring by default.