WAN/LAN (Static, DHCP, PPPoE), MAC address, the IP address
of WAN port and LAN port, ON or OFF of DHCP
mode of LAN port and bridge mode.
Accounts Shows the phone numbers provided by the SIP LINE
1~5 servers.
The last line shows the version number.
8.3.1.2 Wizard
Wizard
Please select the proper network mode according to the network condition.
DPH-400S/DPH-400SE provide three different network settings:
Static: If your ISP server provides you the static IP address, please select
this mode, and then finish Static Mode setting. If you don’t know about
parameters of Static Mode setting, please ask your ISP for them.
DHCP: In this mode, you will get the information from the DHCP server
automatically; need not to input this information artificially.
PPPoE: In this mode, you must input your ADSL account and password.
You can also refer to2.2.1 Network setting to speed setting your network.
Choose Static IP MODE，click【NEXT】can configure the network and
SIP(default SIP1)simply, also can browse too. Click【BACK】can return to
the last page.
To Next Page
Loading...
