D-Link DPH-400SE User Manual

QoS &VLAN
LLDP Settings
Enable LLDP Enable LLDP by selecting it.
Enable Learning
Function
After enabling LLDP Learn, telephone can
automatically learn the data of DSCP, 802.1p, VLAN
ID from the switch. If the data is different from the
data of the LLDP server, telephone will change its
own value as the value of the switch (Synchronous
with VLAN in switch).
Package Interval The time interval of sending LLDP Packet.
QoS Setting
Enable DSCP Enable Dscp by selecting it.
SIP DSCP Specify the value of the SIP Dscp.
Audio RTP DSCP Specify the value of the Audio RTP Dscp.
WAN Port VLAN
Setting
Enable WAN Port
VLAN
Enable WAN Port VLAN by selecting it.
WAN Port VLAN
ID
Specify the value of the WAN Port VLAN ID, the
range of the value is 0-4095.
SIP 8021.p Priority Specify the value of the signal 802.1p priority, the

D-Link DPH-400SE Specifications

General

Brand	D-Link
Model	DPH-400SE
Category	IP Phone
Ethernet Ports	2
Power over Ethernet (PoE)	Yes
Audio Codecs	G.711, G.729
Phonebook	Yes
Protocols	SIP
Call Features	Call Hold, Call Transfer, Call Waiting
Weight	800g