DPH-400S/DPH-400SE supports DHCP, PnP, TR069 and Phone Flash to obtain
the parameters. The PnP and DHCP and Phone Flash are all deployed, endpoint
will go by the following process to try to obtain the server address and other
parameters, when it boots up:
DHCP option PnP server Phone Flash
Auto Provision
Field name explanation
Auto Update
Setting
Current Config
Version
Show the current config file’s version. If the version
of the configuration downloaded is higher than the
version of the running configurations, the auto
provision would upgrade, or stop here. If the endpoints
confirm the configuration by Digest method, the
endpoints wouldn’t upgrade configuration unless the
configuration in the server is different with the
running configuration.
Common Config
Version
Show the common config file’s version. If the
configuration downloaded and the running
To Next Page
Loading...
