D-Link DSL-225 User Manual

D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 103
In this section we can select the default gateway interface for this router.
Selected WAN Interface: Select the IPv4 WAN interface that will be used here.
Selected Default Gateway Interfaces: Select the IPv6 WAN interface that will be
used here.
Available Routed WAN Interfaces: Select a Routed WAN interface.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
In this section we can configure the default gateway parameters for this router.
Gateway Address: Enter the primary gateway IP address used here.
Alternative Gateway: Enter the secondary gateway IP address used here.
Periodic Time: Enter the periodic time value here.
Click the Ping button to initiate the gateway IP check.
Click the Stop button to terminate the gateway IP check.
RIP
Click the RIP button to access the RIP configuration page.

D-Link DSL-225 Specifications

General

Brand	D-Link
Model	DSL-225
Category	Network Router
Language	English