DSL-522T ADSL Router User Guide
Dynamic IP Address
A Dynamic IP Address connection configures the Router to automatically obtain its global IP address from a
DHCP server on the ISP’s network. The service provider assigns a global IP address from a pool of
addresses available to the service provider. Typically the IP address assigned has a long lease time, so it will
likely be the same address each time the Router requests an IP address.
To configure a Dynamic IP Address connection, perform the steps listed below. Some of the settings do not
need to be changed the first time the device is set up, but can be changed later if you choose. See the table
below for a description of all the settings available in this window.
WAN Settings window – Dynamic IP Address
20
To Next Page
Loading...
Need help?
General
