D-Link DSL-G256DG VDSL Router User Manual
Web User Interface Configuration Page 118
In this section we can configure the TR-069 client.
Inform: Click Enable to allow the CPE to accept the commands from ACS.
ACS URL: Enter the ACS URL.
ACS User Name: Enter the ACS username that the TR-069 service is provided.
ACS Password: Enter the ACS password that the TR-069 service is provided.
WAN Interface used by TR-069 client: Select the WAN interface used by TR-069
client.
Display SOAP messages on serial console: Click Enable to display SOAP
messages on serial console.
Connection Request Authentication: Select to enable connection request
authentication. When selected, enter Connection Request User Name and
Connection Request Password.
Connection Request User Name: Enter the username for connection request
authentication.
Connection Request Password: Enter the password for connection request
authentication.
Connection Request URL: Display the URL for connection request authentication.
Click the GetRCPMethods button to request the RCP method information form the
ACS.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
To Next Page
Loading...
Need help?
General
