D-Link DSL-G256DG VDSL Router User Manual
Web User Interface Configuration Page 123
After clicking the Add button, the following page is available.
In this section we can create a Static Route entry.
IP Version: Select the IP version used here. Options to choose from are IPv4 and
IPv6.
Destination IP address/prefix length: Enter the destination IP address for this
route entry here.
Interface: Select the interface this will be associated with this rule here.
Gateway IP Address: Enter the gateway IP address for this route entry here.
Metric: Enter the metric value, used by this route entry, here.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
To Next Page
Loading...
Need help?
General
