D-Link DSL-G256DG User Manual

D-Link DSL-G256DG VDSL Router User Manual
Web User Interface Configuration Page 161
In this section we can enable Ethernet service OAM including 802.1ag and Y.1731.
When Enabled and 802.1ag is selected, the following section is available.
Interface: Select an interface for this configuration.
MD Level: Select the Maintenance Domain level.
MD Name: Enter the name of Maintenance Domain.
MA ID: Enter the Maintenance Association Identifier.
Local MEP ID: Enter the local MEP ID.
Local MEP VLAN ID: Enter the local MEP VLAN ID.
Remote MEP ID: Enter the remote MEP ID.
When Enabled and 802.1ag is selected, the following section is available.
Interface: Select an interface for this configuration.
MEG Level: Select the Maintenance Entity Group level.
MEG ID: Enter the Maintenance Entity Group ID.
Local MEP ID: Enter the local MEP ID.
Local MEP VLAN ID: Enter the local MEP VLAN ID.
CCM Transmission: Tick to enable CCM transmission.
Remote MEP ID: Enter the remote MEP ID.

D-Link DSL-G256DG Specifications

General

Brand	D-Link
Model	DSL-G256DG
Category	Network Router
Language	English