D-Link DSL-G256DG User Manual

D-Link DSL-G256DG VDSL Router User Manual
Web User Interface Configuration Page 55
Wireless Security Mode – 802.1X
After selecting to use 802.1X network authentication and enabling the WEP
encryption option as your wireless security mode, the following parameters will be
available to configure:
RADIUS Server IP Address: Enter the IP address of the external RADIUS server
used here.
RADIUS Port: Enter the external RADIUS server port number used here.
RADIUS Key: Enter the RADIUS server Shared Secret here. This key must be
configured on all the wireless clients for them to be able to connect to your
wireless network.
Encryption Strength: Select the WEP key length value used here. Options to
choose from are 128 bit (26 hex digits) and 64 bit (10 hex digits).
Current Network Key: Select one of the 4 key options available and enter a
wireless security key in the appropriate space provided. This key must be
configured on all the wireless clients for them to be able to connect to your
wireless network.
Click the Apply/Save button to accept the changes made.

D-Link DSL-G256DG Specifications

General

Brand	D-Link
Model	DSL-G256DG
Category	Network Router
Language	English