D-Link DSL-G256DG

D-Link DSL-G256DG VDSL Router User Manual
Web User Interface Configuration Page 57
Wireless Security Mode – WPA2-PSK
Wi-Fi Protected Access (WPA2) is the most advanced wireless security method that we can use to prevent unautherized wireless access to this router. WPA2 PSK does not
require an authentication server.
After selecting to use WPA2-PSK network authentication as your wireless security
mode, the following parameters will be available to configure:
WPA/WAPI passphrase: Enter the WPA2-PSK wireless Pre-Shared Key here. This
key must be configured on all the wireless clients for them to be able to
connect to your wireless network. Click the ‘Click here to display’ option to
display the pass-phrase entered.
WPA Group Rekey Interval: Enter the group key update interval value here.
WPA Encryption: Select the WPA2 encryption method here. Options to choose
from are TKIP, AES, and TKIP+AES.
Click the Apply/Save button to accept the changes made.