D-Link DSR-1000N - Jumbo Frames

Unified Services Router CLI Reference Guide
35
Sl No
Command Name
Description
Type and Description
where each part is in the range 0-
255
15
l2tp username
Enter the username to log in
String,
Alphanumeric username
16
l2tp split_tunnel
Set Split Tunnel Mode
Boolean Choice(Y/N)
17
L2tp get_dns_from_isp
Enter Yes to get dns dynamically from
ISP otherwise Enter No and give valid
static dns addresses
Boolean Choice (Y/N),
Enter Yes to get dns dynamically
from ISP otherwise Enter No and
give valid static dns addresses
18
l2tp primary_dns
Valid primary DNS Server IP Address
IP Address,
Primary dns
19
l2tp secondary_dns
Valid secondary DNS Server IP
Address
IP address,
Secondary dns
20
pptp connectivity_type
Set connectivity type
ISP Connectivity Types.
keepalive/idletimeout
21
pptp idle_time
Set idle timeout value
idle timeout value type. Valid range
is 5 to 999
22
pptp my_address
IP address assigned by the ISP to
make a connection with the ISP server
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
23
pptp password
Enter the password to log in.
String, Alphanumeric password
24
pptp server_address
IP address of the PPTP server
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
25
pptp username
Enter the username to log in
String,
Alphanumeric username
26
pptp get_dns_from_isp
Enter Yes to get dns dynamically from
ISP otherwise Enter No and give valid
static dns addresses
Boolean Choice (Y/N),
Enter Yes to get dns dynamically
from ISP otherwise Enter No and
give valid static dns addresses
27
pptp primary_dns
Valid primary DNS Server IP Address
IP Address,
Primary dns
28
pptp secondary_dns
Valid secondary DNS Server IP
Address
IP address,
Secondary dns
29
pptp mmpe_encryption
Set Mmpe Encryption
Boolean Choice (Y/N)
30
pppoe profile1
Enable first PPPOE profile
Boolean Choice (Y/N)
31
pppoe profile2
Enable second PPPOE profile
Boolean Choice (Y/N)
32
cancel
Roll back wan configuration changes
33
exit
Save wan configuration changes and
exit current mode
34
save
Save wan configuration changes