D-Link DSR-1000N - Static IP

Unified Services Router CLI Reference Guide
42
Sl No
Command Name
Description
Type and Description
5
static prefix
set prefix length
Integer,
Prefix length
6
static primary_dns
Set ipv6 primary dns address
IP Address,
Primary dns
7
static secondary_dns
Set ipv6 secondary dns address
IP Address,
Secondary dns
8
Cancel
Roll back wan configuration changes
9
Exit
Save wan configuration changes and
exit current mode
10
Save
Save wan configuration changes
8.42 net wan wan2 ipv6 configure
Sl No
Command Name
Description
Type and Description
1
Dhcpc
stateless_mode_enable
Stateless mode configuration
stateless mode configuration.
(StatelessAddrAutoConfig/StatefulA
ddrAutoConfig)
2
Dhcpc
prefix_delegation_enable
Prefix del egation configuration,
Boolean Choice(Y/N)
3
isp type
Set type of connection used
static/dhcpc/PPPoE
Isp type,
Static/dhcpc/PPPoE
4
Static
gateway_address
Set ipv6 gateway address
IP Address
Gateway address
5
static ip_address
set ipv6 address
IP Address,
Static address
6
static prefix
set prefix length
Integer,
Prefix length
7
static primary_dns
Set ipv6 primary dns address
IP Address,
Primary dns
8
static secondary_dns
Set ipv6 secondary dns address
IP Address,
Secondary dns
9
pppoe username
Enter the username to authenticate
String,
Alphanumeric username
10
pppoe password
Enter the password to authenticate
String,
Alphanumeric username
11
pppoe authOpt
Setting authentication options
Authentication option types
like(Auto/PAP/CHAP/MS-
CHAP/MS-CHAPv2)
12
pppoe dhcpv6_opt
Enter the dhcpv6 option for configuring
additional parameters
Dhcpv6 options (Disable-
Dhcpv6/Stateless-Dhcpv6/Stateful-
Dhcpv6/Stateless-Dhcpv6-
PrefixDelegation)