D-Link DSR-1000N - WAN2 Settings; WAN

Unified Services Router CLI Reference Guide
50
Sl No
Command Name
Description
Type and Description
changes.
9.16 security ip_or_mac_binding delete
<row_id>
Sl No
Command Name
Description
Type and Description
1
security ip_or_mac_binding
delete <row_id>
Row Id Of the rule to be deleted
Integer,
Row Id Of the rule to be deleted
9.17 security port_triggering add/edit
Sl No
Command Name
Description
Type and Description
1
incoming_start_port
<inPortStart>
start port number of the incoming traffic
range
Port number, (0..65535)
2
incoming_end_port
<inPortEnd>
end port number of the incoming traffic
range
Port number, (0..65535)
3
name <name>
Name of the rule
String,
Specifies an easily identifiable
name for this rule
4
outgoing_start_port
<outPortStart>
start port number of the outgoing traffic
Port number, (0..65535)
5
outgoing_end_port
<outPortEnd>
end port of the outgoing traffic
Port number, (0..65535)
6
protocol <protocol>
Specify whether the port uses the TCP
or UDP protocol
Protocol type,
UDP/TCP
7
rule_enable <status>
specify whether to enable or disable
the rule
Boolean choice (Y/N)
8
save
Save port triggering configuration
changes.
9
exit
Save port triggering rules configuration
changes and exit current mode.
10
cancel
Roll back port triggering configuration
changes.
9.18 security port_triggering delete <row_id>
Sl No
Command Name
Description
Type and Description
1
security port_triggering delete
<row_id>
Row Id Of the rule to be deleted
Integer,
Row Id Of the rule to be deleted