D-Link DSR-500N - Chapter 11. Configuration Commands under Branch DOT11; Dot11 Profile Add <Ltprofile_Name; Dot11 Profile Edit <Ltprofile_Name

Unified Services Router CLI Reference Guide
104
Chapter 11. Configuration commands
under branch DOT11
11.1 dot11 profile add <ltprofile_name>
S.No
Command Name
Description
Type and Description
1
<ltprofile_name>
802.11 profile configuration mode.
String
2
save
Save profile configuration changes
3
exit
Save profile configuration changes and exit current mode.
4
ssid
Set the 802.11 profile SSID.
String
5
broadcast-ssid
Enable or disable SSID broadcast.
Boolean choice
6
security_type
Set the profile security type.
802.11 Security Types
7
w ep
Set profile WEP options.
8
w ep authentication
Set WEP authentication type.
WEP Authentication Types
9
w ep encryption
Set WEP encryption type.
WEP Encryption Types
10
w ep key
Set WEP key. Not required if passphrase is set.
WEP key index type (1-4)
String
11
w ep passphrase
Set WEP passphrase to generate WEP key from.
WEP key index type (1-4)
String
12
w pa
Set the WPA options.
13
w pa authentication
Set WPA authentication type.
WPA Authentication Types
14
w pa encryption
Set WPA encryption type.
WPA Encryption Types
15
w pa wpa-password
WPA Passw ord. Needed only if authentication is PSK
String
11.2 dot11 profile edit <ltprofile_name>
S.No
Command Name
Description
Type and Description
1
<ltprofile_name>
802.11 profile configuration mode.
String
2
save
Save profile configuration changes
3
exit
Save profile configuration changes and exit current mode.
4
ssid
Set the 802.11 profile SSID.
String
5
broadcast-ssid
Enable or disable SSID broadcast.
Boolean choice
6
security_type
Set the profile security type.
802.11 Security Types
7
w ep
Set profile WEP options.
8
w ep authentication
Set WEP authentication type.
WEP Authentication Types
9
w ep encryption
Set WEP encryption type.
WEP Encryption Types
10
w ep key
Set WEP key. Not required if passphrase is set.