D-Link DUB-E130 - Verifying Installation Status

14D-Link DUB-E130 User Manual
Section 3 - Troubleshooting
How do I verify that my DUB-E130 is properly installed?
Windows
You can verify that the adapter has been properly installed in Device Manager by following these steps:
• Right-click on the My Computer icon and select Properties.
- For Windows XP: Go to the Hardware tab and click on the Device Manager button
- For Windows Vista: Click on the Device Manager item under the Tasks group.
- For Windows 7: Click on the Device Manager link in the left-hand frame of the window.
- For Windows 8: Use the search function to search for “Control Panel.” Once located, open the control panel and
choose the System and Security group. Next, click on the Device Manager link under System.
- For Windows 10: Click on the Device Manager link in the left-hand frame of the window.
• Expand the Network Adapters heading by clicking on the plus (+) sign next to Network Adapters.
• Right-click on the My Computer icon and select Properties.
• The D-Link USB DUB-E130 should appear with a green and gold network adapter symbol.
• If the D-Link USB DUB-E130 in Device Manager appears with a bright yellow exclamation mark or a red x, there may be
a hardware conict present.
Mac
• Click the Apple icon on the task bar, select System Preferences, and then click the Network icon.
• You will find that a new Ethernet network interface is available. It is usually named Ethernet Adapter (en1) or Ethernet
Adapter (en2).