12
Using the Setup Wizard (continued)
IP address, Subnet mask and Gateway
If Fixed IP is chosen, enter each of these settings for the DVC-1000. You will
be able to obtain the IP address, subnet mask and gateway address from your
router conguration settings, ISP or network administrator.
Username and Password
If PPPoE is chosen, enter the Username and Password for your PPPoE
account.
Host name (optional):
Your Internet Service provider may require you to provide a host name to
connect to the Internet. If this is required, you can enter it here. Today, this is
rarely required on a broadband connection and this setting is optional.
MAC: xx:xx:xx:xx:xx:xx
MAC (Media Access Control) is an unique identier for the Ethernet network
hardware of your DVC-1000. If you need to know the MAC address of your
DVC-1000, it can be found on this screen.
Press Next to continue.
PPPoE is used when connecting
directly to a DSL modem that
offers a PPPoE connection. Your
user name and password for the
PPPoE account must be entered
in the provided elds.
To Next Page
Loading...
Need help?
General
