45
Using the DVC-1000 with Routers, Gateways
or Broadband Modems (continued)
You have now completed the entering of one port to be opened. You will need
to open six more ports.
Repeat steps A through G ve more times for each one of the following ve
ports: 15329, 15330, 15331, 15332 and 15333.
The last port will be opened slightly differently:
Repeat steps A through C on the previous page.
Choose TCP as the Trafc Type
Enter 1720 as the Private Port and Public Port
Under Schedule, Click Always
Click Save Settings to complete
Opening Ports on Your Routers and Gateways (continued)
You have now completed the opening of the 7 ports. Your DVC-1000 is ready
to use with your router or gateway!
(Important: Not all routers and gateways are the same; please refer to your
router or gateway user manual for specic instructions on opening ports.)
To Next Page
Loading...
Need help?
General
