12
Appendix A
Using the Configuration Utility
For Macintosh OS X (10.2.x)
Load System Preferences and you will see
an icon located near the bottom called
Wireless Adaptor
Single Click
A. Network Name: The
Service Set Identifier is the
name assigned to the
wireless network. The
factory SSID setting is set
to default.
B. Network Type:
Displays the type of
network you are con-
nected to. The factory
setting is set to Access
point. Ad-Hoc mode is
used for peer-to-peer
networking.
D. Signal Strength: The
Signal Strength repre-
sents the wireless signal
between the access point
and the DWL-122.
A
B
C
D
C. Channel: Displays the
channel information. By
default, the channel is set to 6.
Please note that the DWL-122
will automatically adjust
channel depending on the
Access Point.
E
F. My Networks: For setting up
multiple network profiles.
Convenient for users travelling
between wireless networks in
different areas.
F
E. Available Wireless
Networks: Wireless
Networks within range
of the DWL-122. Also
displays the type of
network, signal
strength, channel, and if
encryption is enabled.
To Next Page
Loading...
