14
Appendix B
Using the Configuration Utility
For Windows Operating Systems
A. Status: Displays the
MAC Address of the
Access Point that is
associated with the
DWL-122.
B. SSID
: The Service Set Identifier
is the name assigned to the
wireless network. The factory
SSID setting is set to default.
F. TxRate: The default
setting is Auto; meaning,
TxRate settings are
automatically determined
by the DWL-122 depend-
ing on the distance from
the access point.
H. Signal Strength: The Signal Strength represents
the wireless signal between the access point and the
DWL-122. The percentage coincides with the graphical
bar.
G. Channel: Displays the channel
information. By default, the channel is
set to 6. Please note that the DWL-122
will automatically adjust channel
depending on the Access Point.
E
C
D
F
B
A
G
H
I
C. Frequency
: Dis-
plays the current
frequency used by
the adapter.
D. Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for
peer-to-peer networking.
E. Encryption: Displays the current encryption status of the wireless connection.
I. Packet
Count: Graphi-
cally displays
the statistics of
data transmitted
and received.
To Next Page
Loading...
