10
Removing the DWL-122 (Windows XP)
After installing the DWL-122,
the icon below will appear in
the taskbar at the bottom of
the screen (for WinXP service
pack I and above).
Before you disengage the DWL-
122 from the USB port, you must
click on the icon (illustrated above)
that resides in the taskbar.
When the screen at right appears,
highlight the DWL-122.
Click Stop
Windows will notify you when it is safe to remove the DWL-122 from the USB
port.
Inserting the DWL-122
Using the DWL-122 with
Plug one end of the USB extension cord into
the USB port on your computer and plug the
other end into the DWL-122.
Insert the DWL-122 into an available USB
port.
Getting Started
DWL-122 USB Adapter
the extension cord
To Next Page
Loading...
