15
Using the Configuration Utility with Windows OS
(continued)
Link Info
SSID:
The Service Set Identifier
is the name assigned to
the wireless network. The
factory SSID setting is de-
fault.
Tx Rate:
The default setting is Auto; Tx Rate settings are automatically determined for
an optimal speed up to a maximum of 11Mbps.
Status:
Displays the MAC address
of the access point or
router to which the DWL-
122 is associated
Channel:
The default setting is Auto. The channel selection is automatically deter-
mined by the DWL-122.
Signal Strength:
Displays the signal strength of the DWL-122’s wireless connection to the ac-
cess point or router.
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Frequency:
802.11b indicates that the
DWL-122 is communicat-
ing in the 2.4GHz band.
Encryption:
You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.
Wireless Mode:
Either Infrastructure or Ad-Hoc will be displayed here. (Please see the Getting
Started section in this manual for an explanation of these two modes.)
Rescan Button:
Rescans for the strongest signal with the current SSID and associates with that
access point or router.
To Next Page
Loading...
