51
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Device Configuration > Wireless
Using the AP Manager
*Maximum wireless signal rate derived from IEEE Standard 802.11a specifications. Actual data throughput
will vary. Network conditions and environmental factors lower actual data throughput rate.
A pulldown menu for selecting the transmit power of the selected
device(s).
Tx Power:
Beacons are packets sent by an access point to synchronize a
network. Specify the beacon value for the selected device(s) here.
The default value of 100 is recommended.
Beacon Interval
(20~1000):
DTIM (1~255):
DTIM (Delivery Traffic Indication Message) is a countdown informing
clients of the next listening window for broadcast and multicast
messages.
Select this option to automatically select the most optimal channel
available for wireless networking.
Auto Channel:
This sets the fragmentation threshold (specified in bytes). Packets
exceeding the value set here will be fragmented. The default is 2346.
Fragment
Length
(256~2346):
The RTS value should not be changed unless you encounter
inconsistent data flow. The default value is 2346.
RTS Length
(256~2346):
To Next Page
Loading...
