D-Link DWL-650 - Setting Up an Infrastructure Network

10
Getting Started
Setting Up an Infrastructure Network
Please remember that D-Link Air wireless devices are pre-configured to connect
together, right out of the box, with the default settings.
You will need a broadband Internet access (Cable/DSL)
subscription.
Consult with your Cable/DSL provider for proper installation of the
modem.
Connect the modem to a wireless Broadband router (such as the
D-Link DI-614+.)
See the Quick Installation Guide included with the
router.
If an Ethernet port is available on the router, connect a computer
that is equipped with an Ethernet Network adapter (such as the
DFE-530TX+
)
to the router.
Install the drivers for the wireless network adapter (such as the
D-Link Air DWL-650) into the laptop computer.
See the Quick
Installation Guide included with the DWL-650.