D-Link DWL-650 - Using the Configuration Utility

12
5. Using the Configuration Utility
D-Link Air DWL-650 uses the Configuration Utility as the management
software. The utility provides the user an easy interface to change any
settings related to the wireless adapter. After you have completed the
installation of the DWL-650 (refer to the Quick Installation Guide that came
with your purchase) whenever you start the computer, the Configuration
Utility starts automatically and the system tray icon is loaded in the toolbar
(see illustration below*.) Clicking on the utility icon will start the
Configuration Utility. Another way to start the Configuration Utility is to
click on Start>Programs>D-Link Air>D-Link Air Utility.
.
To use the D-Link Configuration Utility
with XP, right-click on the Wireless
network icon in the taskbar in the
lower right-hand corner of your
computer screen
In the window that appears, select
V
iew
Available Wireless Networks and click
the Advanced button. The screen at righ
t
will appear.
Uncheck the box in the properties
window that enables windows
configuration.
If the icon does not display in the taskbar,
then click on this icon on your desktop to
open.
After you have done this, you can then
use the D-Link Configuration Utility with
XP by clicking on the D-Link
Configuration Utility icon.
Select the Wireless Networks tab.
*Config Utility icon
in system tray