36
Networking Basics
Checking the Wireless Connection by Pinging
For Windows XP and 2000:
Go to Start > Run > type cmd. A window similar to this will appear. Type
ping xxx.xxx.xxx.xxx, where xxx is the IP address of the Wireless Router
or Access Point.
A good wireless connection will show four replies from the wireless router or
access point, as shown.
For Windows Me and 98SE:
Go to Start > Run > type command. A window similar to this will appear.
Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the Wireless
Router or Access Point. A good wireless connection will show four replies
from the wireless router or access point, as shown.
To Next Page
Loading...
