D-Link DWL-G122 - Wireless Installation Considerations

10
Appendix B - Link Info
Using the Configuration Utility
For Windows Operating Systems
A. Status: Displays the
MAC Address of the
Access Point that is
associated with the
DWL-G122.
B. SSID
: The Service Set Identifier
is the name assigned to the
wireless network. The factory
SSID setting is set to default.
G. TxRate: TxRate settings are automatically
determined by the DWL-G122 depending on the
distance from the access point.
I. Signal Strength / Link Quality: Represents
the wireless signal quality and strength
between the access point and the DWL-G122.
The percentage coincides with the graphical
bar.
E
C
D
F
B
A
C. Frequency
: Displays
the current frequency
used by the adapter.
D. Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for
peer-to-peer networking.
E. Encryption: Displays the current encryption status of the wireless connection.
F. Connection Info:
Displays your current
Connection State.
G
H
I
H. Channel: Displays the channel
information. By default, the channel is
set to 6. Please note that the DWL-G122
will automatically adjust channel
depending on the Access Point.