11
Using the Configuration Utility (continued)
Home > Wireless > WEP
Security: Select WEP.
Authentication: Select Open System to communicate the key across the
network. Select Shared Key to limit communication only to those devices that
share the same WEP settings.
WEP Encryption:
Select 64-bit or 128-bit WEP encryption.
Key Type:
Select Hexadecimal or ASCII key type
Keys 1-4: Input up to four encryption keys. You will select one of these to be
the active key.
Apply: Click Apply to apply the changes.
Hexadecimal digits consist of the numbers 0-9 and the
letters A-F
ASCII (American Standard Code for Information
Interchange) is a code for representing English letters as
numbers from 0-127
To Next Page
Loading...
