D-Link DWR-710 - User Manual

To Next Page

Technical Support Setup Procedure

Page 1 of 3

How to setup and connect wireless to DWR-710?

Note:

By default, the network name(SSID) of the DWR-710 will be in the format

dlink_DWR_710_xxxx where “xxxx” represents the last 4 characters of the DWR-710’s MAC

Address.

Please find the default SSID and password on the product label after removing the front cover.

Please Write the password for later reference

Step 1 Ensure that the device has been properly inserted with an active SIM.

Step 2 - Connect the DWR-710 to an available USB port of a computer or a USB output power

device (eg Power Bank).

Step 3 - Ensure that the device is turned on and the desired SSID is found in the list of

Wireless Networks on your Wireless Computer. Please consult the computer operational

manual on enabling the Wireless connection of the computer.

Other manuals for D-Link DWR-710

Need help?

Do you have a question about the D-Link DWR-710 and is the answer not in the manual?

General