Do you have a question about the D-Link DWR-953 and is the answer not in the manual?
DSL WAN | - |
---|---|
Ethernet WAN | Yes |
WAN connection type | RJ-45 |
3G/4G USB modem compatibility | No |
Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
Wi-Fi standards | Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
WLAN data transfer rate (max) | 1200 Mbit/s |
VPN support | L2TP/PPTP/IPSec |
Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3i, IEEE 802.3u |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Ethernet LAN interface type | Gigabit Ethernet |
4G standard | LTE |
Antennas quantity | 2 |
Firewall security | SPI, NAT |
Security algorithms | 64-bit WEP, 128-bit WEP, WPA, WPA2 |
Product type | Tabletop router |
Product color | Black |
LED indicators | Activity, LAN, Power, WAN |
Storage temperature (T-T) | -10 - 70 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 0 - 95 % |
Operating relative humidity (H-H) | 10 - 90 % |
Certification | CE |
Ethernet LAN (RJ-45) ports | 4 |
Power source type | AC |
Harmonized System (HS) code | 85176990 |
Depth | 180 mm |
---|---|
Width | 170 mm |
Height | 80 mm |
Weight | 400 g |
Guides through the initial setup wizard for the router's configuration.
Guides on configuring various WAN connection types for internet access.
Steps to set up an LTE WAN connection, including PIN and operator settings.
Configuration steps for a Static IPv4 WAN connection with ISP details.
Setup for PPPoE, IPv6 PPPoE, and Dual Stack WAN connections.
Configures SSID, security, password, and other wireless network parameters.
Instructions for changing the administrator password for router access.
Configures automatic switching between WAN connections for uninterrupted internet.
Enables load balancing across multiple WAN connections for increased bandwidth.
Enables and configures PPTP/L2TP VPN servers and user accounts.
Manages all settings for the router's wireless network.
Configures fundamental Wi-Fi parameters for 2.4GHz and 5GHz bands.
Manages network security features like IP filtering and virtual servers.
Creates and manages rules for filtering incoming and outgoing IP packets.
Sets up virtual servers to redirect incoming internet traffic to internal IPs.
Configures the Demilitarized Zone host for specific network exposure.
Manages administrator password, backups, reboots, and interface language.