Need help?Do you have a question about the D-Link DWR-921 and is the answer not in the manual?
General| VPN support | L2TP/PPTP/IPSEC |
|---|---|
| Ethernet LAN | Yes |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi band | No |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 150 Mbit/s |
| Ethernet LAN (RJ-45) ports | 4 |
| DHCP client | - |
| Antennas quantity | 2 |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA, WPA2 |
| Certification | CE, Wi-Fi |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product color | Black, White |
| LED indicators | 3G, LAN, Power, WAN, WLAN |
Weight and Dimensions| Depth | 111.5 mm |
|---|---|
| Width | 190 mm |
| Height | 23.5 mm |
| Weight | 500 g |
Guides on how to connect the router to a PC via Ethernet or Wi-Fi adapters.
Step-by-step instructions for connecting the router to a PC using an Ethernet cable.
Instructions for connecting the router to a PC wirelessly via a Wi-Fi adapter.
Instructions on how to access and interact with the router's web-based configuration interface.
Guides users through the initial setup and configuration of the router.
Allows selection of the router's operating mode (Router, AP, Repeater, Client).
Configures the router for wired ISP connections, acting as a primary router.
Steps to establish a WAN connection using the built-in LTE modem.
Details on setting up various types of wired WAN connections.
Configuration steps for a static IPv4 WAN connection.
Configuration steps for a static IPv6 WAN connection.
Setup for various PPPoE-based WAN connection types.
Configuring PPTP/L2TP connections with dynamic IP addresses.
Configuring PPTP/L2TP connections with static IP addresses.
Guides on setting up the router's Wi-Fi network name, password, and security.
Configuration and management of Wide Area Network (WAN) connections for Internet access.
Steps to create a WAN connection using Dynamic or Static IPv4 addressing.
Steps to create a WAN connection using Dynamic or Static IPv6 addressing.
Configuration for establishing a PPPoE WAN connection.
Setting up PPTP, L2TP, and L2TP over IPsec WAN connections.
Configuration for PPPoE IPv6 and PPPoE Dual Stack WAN connections.
Setting up a WAN connection using the built-in 3G/LTE modem.
Configuration of the router's Local Area Network (LAN) settings.
Settings for the router's IPv4 address, DHCP server, and DNS records.
Settings for the router's IPv6 address, DHCPv6 server, and DNS records.
Configuration for establishing secure IPsec VPN tunnels for encrypted communication.
Displays LTE modem information and allows PIN code management.
Creates and manages rules for filtering incoming and outgoing IP packets.
Manages router settings, including password, language, and factory defaults.
Updates the router's firmware and configures automatic update checks.
Procedure for updating the router's firmware from a local PC file.
Procedure for updating the router's firmware remotely from the D-Link server.
Important safety instructions and conditions for proper and safe use of the device.
To Next Page
