DWR-921 4G LTE Router
User Manual
Configuring via Web-based Interface
+3# 78!
On the Advanced / TR-069 Client page, you can configure the router for communication with a
remote Auto Configuration Server (ACS).
The TR-069 client is used for remote monitoring and management of the device.
Figure 150. The page for configuring the TR-069 client.
You can specify the following parameters:
Parameter Description
TR-069 Client
Enable TR-069 client
Move the switch to the right to enable the TR-069 client.
Interface
The interface which the router uses for communication with the
ACS. Leave the Automatic value to let the device select the
interface basing on the routing table or select another value if
required by your ISP.
Page 189 of 255
To Next Page
Loading...
