DWR-921 4G LTE Router
User Manual
Configuring via Web-based Interface
*
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
Figure 175. The System / Log page. The Settings tab.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter Description
Logging
Type
Select a type of logging from the drop-down list.
• Local: The system log is stored in the router's memory. When
this value is selected, the Server and Port fields are not
displayed.
• Remote: The system log is sent to the remote host specified
in the Server field.
• Remote and local: The system log is stored in the router's
memory and sent to the remote host specified in the Server
field.
Level Select a type of messages and alerts/notifications to be logged.
Page 233 of 255
To Next Page
Loading...
