D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual
Configuring via Web-based Interface
Advanced
In this menu you can configure advanced settings of the router:
• create or edit VLANs
• use LAN ports of the router as additional WAN ports and also use the WAN port as a LAN
port
• add name servers
• configure a DDNS service
• configure autonegotiation or manually configure speed and duplex mode for each Ethernet
port of the router
• configure notifications on the reason of the Internet connection failure
• define static routes
• configure TR-069 client
• enable the function of mirroring the router’s ports
• enable the UPnP function
• enable the built-in UDPXY application for the router
• allow the router to use IGMP
• allow the router to use RTSP, enable the SIP ALG, the PPPoE/PPTP/L2TP/IPsec pass
through functions for the router.
Page 173 of 255

D-Link DWR-921 Specifications

General

VPN support	L2TP/PPTP/IPSEC
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	150 Mbit/s
Ethernet LAN (RJ-45) ports	4
DHCP client	-
Antennas quantity	2
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2
Certification	CE, Wi-Fi
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Product color	Black, White
LED indicators	3G, LAN, Power, WAN, WLAN

Weight and Dimensions

Depth	111.5 mm
Width	190 mm
Height	23.5 mm
Weight	500 g