D-Link DWR-720P - Answer Second Incoming Call; Selecting Current Phone Number

25
2.4.3 Answer second incoming call
 Please make sure the network supports call waiting function and the status has been set to Enabled.
 To Enable Call Waiting, in idle screen, [Menu]  [Settings]  [3.Call settings]  [4.Call waiting]  [Activate].
 If there is a second incoming call during talk, you’ll hear a “Beep” tone and the screen will prompt you of the incoming call.
 Press [Left soft key] and select [Hold & answer] to put the first call on hold. Or select [Release & answer] to terminate the first call.
 Press [Power key] or [Right soft key] to terminate the second call.
 If the first call was put on hold, you will need to press [Left soft key] and [Unhold] to activate the first call.
2.4.4 Selecting current phone number
When the second call is answered, press [Left soft key] to enter [Menu]:
1. Add new call: Make a second call and place the first call on hold.
2. Hold: Place the current call on hold.
3. Mute: You can now hear your caller but your caller cannot hear you.
4. Adjust volume: Adjust the volume of the handset, press right for louder and left for softer.
5. Contacts: Access the phonebook.
6. Call logs: Access the call logs menu.
7. Messaging: Access the messaging menu.