D-Link DWR-720P - Network Type; Call Divert

37
6.3.2 Network type
You can set your preferred network type: WCDMA preferred, Prefer GSM, GSM, and WCDMA.
6.3.3 Call divert
Divert the incoming calls to another phone number.
1. Call forwarding unconditional: This setting redirects all incoming calls to another phone number. Press [Activate] to enable this function.
You can choose between [Divert to voicemail] or [Divert to number].
If [Divert to voicemail] is selected, make sure the correct settings are configured per the SIM card’s service provider under [Line number].
If [Divert to number] is selected, enter the number which you wish to divert the call to, or press [Contacts] to select from an existing
number.
To deactivate this function, press [Off].
You can check if this function has been turned on/off by pressing [Check status].
2. Call forwarding on busy: This setting redirects all incoming calls to another phone number if the phone line is busy. Phone line can be
busy if the number is calling out, you’re not in a service area or you’re using Call Waiting and already have two callers on the line.
Press [Activate] to enable this function. You can choose between [Divert to voicemail] or [Divert to number].
If [Divert to voicemail] is selected, make sure the correct settings are configured per the SIM card’s service provider under [Line number].
If [Divert to number] is selected, enter the number which you wish to divert the call to, or press [Contacts] to select from an existing
number.