D-Link DWR-920V - Connect via Wi-Fi

10D-Link DWR-920V User Manual
Section 3 - Conguration
Connect via Wi-Fi
Note: The following example uses Windows 7’s built-in wireless connection utility. If you are using a dierent operating system, or a third party connection
utility, the process may be dierent. Please refer to the documentation that came with your operating system or wireless client for further information on
how to connect to a wireless network.
To connect to the router using Wi-Fi, open your operating system’s wireless networking utility
and scan for available networks to connect to. By default, the network name (SSID) of the
DWR-920V will be in the format dlink_DWR-920V_xxxx, where “xxxx” represents the last
four characters of the DWR-920V’s MAC address. The default SSID and password can also be
found on the product label attached to the battery cover. For more information on where to
nd this label refer to Hardware Overview on page 4.
Once you have located your DWR-920V’s wireless network, select it and click Connect.
dlink_DWR-920V_xxxx
dlink_DWR-920V_xxxx