What to do if I forgot my D-Link Network Router's SSID or wireless encryption key when adding a new device?
To connect a new wireless device, you need the correct Wireless Network Name (SSID) and encryption key. Use the web-based user interface to check or choose your wireless settings. Write down these settings to enter them on each wirelessly connected PC.
How to reset my D-Link Network Router to factory default settings?
If you've forgotten your router’s administrator password, use a paperclip to press and hold the reset button on the router for about 10 seconds. Keep in mind that resetting to factory defaults will erase your current configuration. To reconfigure, log in and run the Setup Wizard.
Why is my D-Link Network Router unable to establish an internet connection?
If you're using a mobile connection, ensure you're within range of your mobile service provider and that the service is correctly configured. If you're using WAN via an ADSL/Cable service, verify that the modem is enabled, connected, operational, and properly configured.
General| DSL WAN | No |
|---|---|
| Ethernet WAN | Yes |
| 3G/4G USB modem compatibility | - |
| 4G standard | LTE-FDD |
| 3G standards | WCDMA |
| SIM card type | NanoSIM |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 2600 Mbit/s |
| WLAN data transfer rate (first band) | 800 Mbit/s |
| WLAN data transfer rate (second band) | 1733 Mbit/s |
| Product type | Tabletop router |
| Product color | White |
| LED indicators | LTE, Power, WAN, WLAN |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.11k, IEEE 802.11r, IEEE 802.11v |
| Ethernet LAN data rates | 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| USB 2.0 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 4 |
| Security algorithms | WPA, WPA2, WPA3 |
| Antennas quantity | 8 |
| Output current | 1 A |
| Output voltage | 12 V |
| Power source type | AC |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Mobile operating systems supported | Android, iOS |
| Number of products included | 1 pc(s) |
| Sustainability certificates | CE, RoHS |
Weight and Dimensions| Depth | 245 mm |
|---|---|
| Width | 234.5 mm |
| Height | 55.25 mm |
| Weight | 920 g |
Details the front view of the router, identifying key components and LEDs.
Details the rear view of the router, identifying ports and buttons.
Ensures the router is prepared and powered off before starting the installation process.
Provides guidelines for optimizing wireless signal range and performance by considering placement and interference.
Explains how to access the router's configuration utility via a web browser.
Configures the primary 2.4GHz Wi-Fi settings, including SSID, password, and security.
Configures the primary 5GHz Wi-Fi settings, including SSID, password, and security.
Configures the router's Local Area Network (LAN) IP address and DHCP server settings.
Configures IPv4 Wide Area Network (WAN) connection settings, including Dual WAN.
Configures IPv6 Wide Area Network (WAN) connection settings, including ULA.
Explains how to use the Wi-Fi Protected Setup (WPS) button to connect devices.
Troubleshooting steps for accessing the router's web interface.
Instructions on how to reset the router to factory defaults if the password is forgotten.
Troubleshooting connection issues, possibly related to MTU size or other network settings.
To Next Page
