To Next PageTo Next Page
Need help?Do you have a question about the D-Link DWR-953V2 and is the answer not in the manual?
General| DSL WAN | - |
|---|---|
| Ethernet WAN | Yes |
| WAN connection type | RJ-45 |
| 4G standard | LTE-TDD & LTE-FDD |
| 3G standards | UMTS |
| 4G LTE category | 8 |
| Dual SIM support | No |
| 4G bands supported | 700, 800, 900, 1800, 2100, 2300, 2600 MHz |
| GSM bands supported | 850, 900, 1800, 1900 MHz |
| UMTS bands supported | 900, 2100 MHz |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 1200 Mbit/s |
| WLAN data transfer rate (first band) | 300 Mbit/s |
| WLAN data transfer rate (second band) | 866 Mbit/s |
| Networking standards | IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Ethernet LAN (RJ-45) ports | 3 |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA, WPA2 |
| Product type | Tabletop router |
| Product color | Black |
| LED indicators | LAN, Power, WAN |
| Antennas quantity | 2 |
| Certification | CE , FCC , PTCRB, EMC , RoHS |
| Power source type | DC |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 32 mm |
|---|---|
| Width | 154 mm |
| Height | 122 mm |
| Weight | 275 g |
Insert USIM card into the SIM card slot on the router's side.
Connect Ethernet cable from router WAN/LAN port to modem.
Connect PC to router LAN port using an Ethernet cable.
Connect power adapter to router and wall outlet, then press the power button.
Open web browser, enter 192.168.0.1, log in with 'admin'.
Learn to configure the router, check wireless name (SSID) and encryption key.
Procedure to reset the router to its original factory settings using the reset button.
Steps to add new wireless devices when SSID or encryption key is forgotten.
Troubleshoot why an internet connection cannot be established via LTE or WAN.
