D-Link DWR-978 - Static IPv6 Configuration

20D-Link DWR-978 User Manual
Section 3 - Conguration
Static IPv6 Advanced Setting
Internet
Connection:
Specify the type of IPv6 connection your ISP uses. Choose from
Local Connectivity Only, Static IPv6, Auto Conguration
(Stateless/DHCPv6), PPPoE, 6rd.
Use Link-Local
Address:
Indicates whether Use Link-Local Address is Enabled or
Disabled.
IPv6 Address: If Use Link-Local Address is Disabled, enter the IPv6 Address.
Subnet Prex
Length:
If Use Link-Local Address is Disabled, enter the Subnet Prex
Length.
Default Gateway: Enter the Default Gateway used by this connection.
IPv6 DNS Settings
Primary DNS
Server:
Enter the primary DNS IP address that will be assigned to DHCP
clients.
Secondary DNS
Server:
Enter the secondary DNS IP address that will be assigned to
DHCP clients.
LAN IPv6 Address Settings
LAN IPv6 Address: Specify the LAN IPv6 Address.
LAN IPv6 Link-
Local Address:
Indicates the LAN IPv6 Link-Local Address.